Preparing the Trip Tracker to record a track and setting waypoints

To start recording a track and setting waypoints you need too clear the track and enable the logging of a track.

Clearing the track in memory:

Go to the track menu and press the joystick down.
Press the joystick down again and you will see a menu with the following entries.

  • Mark
  • Interval * Clear
  • View
  • Settings

Move the joystick down to the CLEAR entry and press down once and confirm by selecting YES and press down the joystick. Now youre track is clear
Start recording a track

Go to the track menu and press the joystick down.

Select Interval and press joystick down.

Depending on you’re trip length and accuracy you need you can select the interval time. Your can safely select 1 second interval since there is enough memory to record for several hours.

Once you set the interval the recording will start.

Stop recording a track

Go to the track menu and press the joystick down.

Select Interval and press joystick down.

Select Stop and the recording will stop.

How to set Waypoints

In any menu you can just hold down the joystick for 5 seconds and a waypoint will be set at the current location.

< Prev   Next >